Lavadora Siemens Error E18
Error Code E18 on Siemens Washing Machines
What is Error Code E18?
Error code E18 on Siemens washing machines indicates a problem with the water supply. This can be caused by several factors, including:
- A blocked water inlet hose
- A faulty water inlet valve
- A problem with the water pressure
Troubleshooting Error Code E18
To troubleshoot error code E18, you can try the following steps:
Check the Water Inlet Hose
Make sure that the water inlet hose is not kinked or blocked. If it is, straighten it out or replace it.
Check the Water Inlet Valve
The water inlet valve is located at the back of the washing machine. To check it, turn off the water supply and disconnect the water inlet hose. Then, use a multimeter to test the continuity of the valve. If the valve is faulty, it will need to be replaced.
Check the Water Pressure
The water pressure should be between 10 and 100 psi. If the water pressure is too low, the washing machine will not be able to fill properly. You can check the water pressure by using a water pressure gauge. If the water pressure is too low, you will need to contact your water supplier.
Conclusion
Error code E18 on Siemens washing machines can be caused by a variety of factors. By following the troubleshooting steps outlined above, you can identify and fix the problem. If you are unable to fix the problem yourself, you should contact a qualified appliance repair technician.
Komentar